Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in San Fernando, CA
Chimney repair in San Fernando usually comes down to aging masonry on 1950s and 1960s ranch homes. We see cracked fireboxes, loose mortar joints, and clay tile flues that have spalled after decades in valley heat. San Bernardino Chimney Sweep handles the sweep, the repair, and the dryer vent all under one roof, so when an inspection turns up damage, you’re not calling a second company. Call (877) 516-7159 and we’ll walk you through what you’re dealing with in your specific home.
Why San Fernando Homes Are Different
San Fernando’s housing stock is dominated by single-story stucco ranch and Spanish-style homes built between the 1940s and 1970s. The original fireplaces in these homes were laid with brick or stone masonry and clay tile flue liners, and most were designed for occasional ambience, not for standing up to heavy heating loads. After fifty or sixty years of San Fernando Valley heat cycling, the mortar between those clay tiles breaks down. We routinely find spalling tile surfaces and mortar joints that have turned to sand inside the flue.
The 91340 flatlands in particular have their own pattern. When the previous owner capped off a fireplace years ago and stopped using it, the flue becomes a quiet cavity where birds nest and debris collects. Valley heat cracks the crown, the cap rusts out, and the damper seizes. A chimney that has not been inspected in twenty years is not a simple sweep in San Fernando. It’s usually a crown repair and damper job waiting to be found. That’s exactly what our repair team handles.
Winter wood burning here is sporadic, but it’s concentrated into cold snaps when several fires run in one week. That’s when creosote builds up fast on flue walls that are already rough from cracked tile and missing mortar. Santa Ana wind events add another layer. Hot, dry air pulling across the valley creates draft reversals and pushes embers into places they shouldn’t go. The right way to approach any San Fernando chimney is to inspect it as a system, not just brush it and walk away.
Styles & brands we work with
Our Main San Fernando Services
The two calls we get most in San Fernando are chimney sweeping ahead of burn season and dryer vent cleaning when a homeowner realizes the dryer has not vented properly in years. Both are fire-prevention work, and both are handled by our own technicians.
Chimney Sweep in San Fernando
A chimney sweep in San Fernando on an older masonry fireplace means more than running a brush up the flue. We’re removing creosote, checking for cracked tile, clearing out bird nests and debris, and verifying the damper still opens and closes. San Fernando’s older ranch homes often have flues that have never been camera-inspected, so the first sweep is usually when homeowners learn the actual condition of the liner. We use contractor-grade tools and document everything with photos. Read more about our Chimney Sweep in San Fernando service.
Dryer Vent Cleaning in San Fernando
Dryer vents in San Fernando’s single-story homes tend to be short runs, but short runs still collect lint, and lint is exactly what starts dryer fires. If your dryer is taking two cycles to dry a load, or the laundry room feels hot while the dryer runs, the vent has a restriction. We clean the full run from the dryer to the exterior termination and verify the damper works. For homes in the 91340 and 91341 ZIP codes, this is a same-visit add-on when we’re already out for a chimney job. See our Dryer Vent Cleaning in San Fernando page for details.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in San Fernando
Chimney repair in San Fernando is what happens when an older masonry fireplace has gone too long without attention and the damage has moved past what a sweep can fix. Most of the repair calls we run in San Fernando involve cracked crowns, spalled clay tiles, rusted dampers, or flashing that has pulled away from the roofline after years of heat and Santa Ana wind. Our approach is to inspect the flue with a camera so you see the damage, then quote the repair at a flat price before any work starts. The entire repair scope falls under our Chimney Repair service line.
San Fernando’s housing era matters here. Original masonry fireplaces were often built with mortar that was never meant to last sixty years in a hot, dry valley. When the crown cracks, water gets into the brick and the flue, and once water gets in, every freeze-thaw cycle in winter and every heat cycle in summer makes it worse. We find the damage early, show you the photos, and fix it before it becomes a liner replacement. When a liner does need work, we use HeatShield or DuraFlex systems rather than telling you to replace the whole fireplace.
Chimney Crown Repair
Signs you need it
Hairline cracks across the top of the chimney, chunks of crown material missing, or water staining on the ceiling near the fireplace.
What it costs in San Fernando
Chimney crown repair in San Fernando typically runs $300 to $700 depending on crown size, crack depth, and whether we need to rebuild the top surface or can seal and resurface it.
How we do it
We clean off loose material, fill the cracks with a flexible crown sealant, and resurface the crown so water sheds away from the flue instead of pooling.
Chimney Cap Replacement
Signs you need it
A rusted, bent, or missing cap, or signs that birds and debris are getting into the flue because the existing cap is no longer seated correctly.
What it costs in San Fernando
Chimney cap replacement in San Fernando generally runs $120 to $380 depending on flue size, cap material, and whether the old cap requires grinding to remove.
How we do it
We remove the old cap, measure the flue opening, and install a properly sized stainless steel or copper cap with secure mounting brackets and the right mesh for your flue type.
Chimney Flashing Repair
Signs you need it
Water staining on the ceiling around the fireplace, damp drywall near the chimney chase, or visible gaps between the flashing and the roofline.
What it costs in San Fernando
Chimney flashing repair in San Fernando typically runs $350 to $700 depending on flashing size, roof pitch, and how much existing material needs to be removed before resealing.
How we do it
We lift the shingles around the chimney, remove old sealant and damaged flashing, install new sheet metal flashing, and seal the joints with a high-temp roofing sealant.
Chimney Liner Installation
Signs you need it
Cracked or spalled clay tiles visible during inspection, smoke backing into the house, or a liner that has gaps large enough to expose the chimney structure to heat.
What it costs in San Fernando
Chimney liner installation in San Fernando generally runs $2,800 to $5,500 depending on liner type, flue height, and whether we’re relining an existing masonry flue or installing a full DuraFlex system.
How we do it
We measure the flue, select the correct liner system for your appliance and fuel type, then install the liner and connect it to the appliance with proper terminations and hardware.
What Chimney Repair Costs in San Fernando
| Item | Typical range in San Fernando |
|---|---|
| Chimney crown repair | $300 – $700 |
| Chimney cap replacement | $120 – $380 |
| Chimney flashing repair | $350 – $700 |
| Chimney liner installation | $2,800 – $5,500 |
These are flat-rate quotes, not hourly billing. We walk you through the camera inspection first, then give you the number before any work is ordered. San Fernando’s older homes do have one thing that can push price up: when water has been getting in for years and the flue tile is spalled throughout, a simple crown repair may not be enough, and that’s when we talk about a liner. You will see the evidence before we recommend anything.
Can you fix a cracked flue liner in San Fernando?
Yes. Cracked clay tile liners are one of the most common repair items we handle in San Fernando’s older ranch homes. Depending on the extent of the spalling, we can use HeatShield resurfacing to restore the liner without a full replacement, or install a DuraFlex liner when the structure is too far gone. We show you the camera footage first. Call (877) 516-7159 for a free repair estimate.
How long does chimney repair take in San Fernando?
Most crown, cap, and flashing repairs are done in a single visit, usually two to four hours. Liner work takes longer, typically one full day. We quote the timeline when we quote the price, and San Fernando’s single-story homes usually make roof access straightforward.
Brands We Service in San Fernando
Our repair and relining work in San Fernando is built around contractor-grade products, not whatever is on the shelf at the hardware store. We install and service DuraFlex liner systems, HeatShield resurfacing products, and Famco and Copperfield caps and dampers. That means we can stock and order the right components for older masonry fireplaces without waiting on a generic part. Our brands page explains what these systems do and why they matter for a home built in the 1950s.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in San Fernando, CA
| Service | Typical range in San Fernando |
|---|---|
| Chimney sweep | $180 – $230 |
| Dryer vent cleaning | $130 – $190 |
| Chimney cap replacement | $120 – $380 |
| Chimney crown repair | $300 – $700 |
| Chimney flashing repair | $350 – $700 |
| Chimney liner installation | $2,800 – $5,500 |
Two things push the price up in San Fernando specifically. The first is access, and it’s rarely a problem on single-story ranch homes, but some Spanish-style homes have tile roofs that require extra care to walk. The second is condition, and that’s the bigger one: if a chimney has been capped off and ignored for a decade, the first inspection often finds multiple issues that stack up. After we inspect, you get a flat-price quote before any work begins, and every repair gets photo documentation.
Neighborhoods We Serve in San Fernando
San Fernando is a compact city, and most of our work is in the 91340 flatlands south of the 118 and the 91341 area to the north and west. The housing stock is consistent throughout: single-story stucco and ranch homes from the mid-century era, with original masonry fireplaces. We run service across the full city and typically schedule within three to five business days for non-emergency work.
- 91340 flatlands, including the neighborhoods near San Fernando Road and Truman Street
- 91341 north and west areas, including homes near the 118 and Brand Boulevard corridor
- Homes around San Fernando High School and the Civic Center area
- Ranch and Spanish-style homes throughout the city’s residential blocks
Service Area – Cities Near San Fernando
San Bernardino Chimney Sweep works throughout the San Fernando Valley and the surrounding communities, so if you’re just outside San Fernando’s city limits, we still cover your chimney. Our service area includes North Hills, CA, Shadow Hills, CA, Northridge, CA, and Van Nuys, CA. The same flat-price, inspection-first approach applies everywhere we work.
Serving San Fernando, CA — Our Local Coverage Area
We’re based in the San Fernando area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in San Fernando
In most cases we schedule San Fernando calls within three to five business days. For a chimney that’s actively smoking into the house or has visible water damage after rain, we bump those calls earlier because the damage compounds fast. Call (877) 516-7159 and we’ll tell you realistic timing based on what you’re seeing.
For most repair work, no. Crown repair, cap replacement, flashing work, and routine relining on existing flues don’t require permits. If a full fireplace rebuild is ever needed, the scope and permitting is something we’ll discuss before any work starts. Most San Fernando jobs are repair-and-relining scope, not full rebuilds.
We cover the entire city, both the 91340 flatlands and the 91341 areas north and west of the freeway. San Fernando’s compact size means every neighborhood is within easy reach for us, and because the housing stock is so consistent, we know what to expect on the typical 1950s ranch home before we arrive.
If your San Fernando chimney has not been inspected in the last few years, or you’re seeing water stains, smoke backing in, or you’re just not sure what’s going on up there, call San Bernardino Chimney Sweep at (877) 516-7159. We’ll set up an inspection, show you the photos, and give you a flat-price quote before any work begins. We find it and we fix it.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Fernando Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Eric Rhodes"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Robert Quinn"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Gabriela Rodriguez