Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Colton, CA
Chimney repair in Colton usually comes down to one thing: decades of Santa Ana wind stress on older masonry. We see cracked crowns, spalling brick, and clay tile liners with hairline fractures on 1920s bungalows near downtown and 1960s tract homes south of the 10. San Bernardino Chimney Sweep handles the repair work most Colton homeowners need after a routine sweep turns up damage. If you’re looking at a fireplace that hasn’t been touched in years, call us at (877) 516-7159 and we’ll tell you what’s actually going on.
Why Colton Homes Are Different
Colton sits in a wind corridor that runs straight out of the Cajon Pass. That changes how chimneys wear. The Santa Anas push hard through fall and winter, and chimneys on the older streets near La Cadena Drive and Valley Boulevard take the brunt of it. We regularly find cracked crowns on Spanish-style stucco homes from the 1940s and 1950s, where years of wind-driven rain have worked into the mortar joints. Missing spark arrestors are common too, and Colton fire code requires them on all wood-burning appliances, so a standard sweep often turns into a code-compliance fix.
The housing stock matters just as much as the wind. The original citrus-belt bungalows near downtown were built when chimneys were laid with clay tile liners, and those liners don’t hold up forever. Hot, dry summers bake the exterior masonry. Then winter fireplace use, even sporadic use for ambiance rather than heat, expands and contracts the tile. The result is what we see on a lot of Colton inspections: vertical cracking that starts small and gets worse every season the fireplace gets lit. If your home was built before 1980, the liner needs a camera inspection before anyone puts a brush up the flue. On the south side, the tract homes with prefabricated fireplaces have their own issues, mostly around flashing and chase covers that were never flashed well in the first place.
Styles & brands we work with
Our Main Colton Services
Most Colton homeowners call us for one of two reasons: the fireplace needs a proper cleaning, or the dryer vent hasn’t been touched since the house was built. Both are fire risks, and both are things we handle as a specialty chimney and ventilation company.
Chimney Sweep in Colton
A sweep in Colton is rarely just a sweep, because the wind-driven downdrafts push creosote into places it wouldn’t normally collect. We clean the full flue, check the damper, and look at the crown and cap while we’re up there. If your fireplace is in one of the older bungalows in the 92324 ZIP, expect us to recommend a camera inspection before we start, especially if the liner has never been checked. You can read more about what a Colton sweep includes on our Chimney Sweep in Colton page.
Dryer Vent Cleaning in Colton
Dryer vents in Colton collect lint faster than people expect, and a clogged vent is one of the leading causes of residential fires. This isn’t an add-on service we offer as an afterthought. It’s a core part of what we do, because every home with a dryer has a fire risk sitting behind the wall. In older Colton homes, short vent runs through the laundry room wall are less of a problem than the long runs in newer south-side houses where the dryer sits in the center of the home. See Dryer Vent Cleaning in Colton for what’s involved and what it costs.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Colton
Chimney repair in Colton usually starts with a problem the homeowner didn’t know they had. The Santa Ana winds have been working on the chimney crown for years, and the clay tile liner has developed cracks that were never visible from the ground. That’s the reality of owning an older Colton home. Our job is to find the damage and fix it, using materials built for exactly this kind of work. We carry DuraFlex liner systems, HeatShield resurfacing materials, and Copperfield chimney caps, among others. When we inspect a chimney in Colton, we’re looking at it as a repair job from the first minute, because with this housing stock and this wind, there’s almost always something to address. If you need a specialist who can do the whole job, not just report it, that’s our Chimney Repair service.
Chimney Cap Installation
Signs you need it
You can hear wind howling down the flue, you’ve found bird or animal nesting material in the firebox, or rain has been getting in around the top of the chimney.
What it costs in Colton
A chimney cap installation in Colton typically runs between $280 and $520 depending on the flue size and the cap material.
How we do it
We measure the flue, select a Copperfield or Gelco cap that fits the liner dimensions, secure it to the crown, and seal the mounting points so wind-driven rain can’t get under the cap.
Chimney Crown Repair
Signs you need it
The concrete crown on top of the chimney has visible cracks, chunks are missing, or water stains are showing on the ceiling near the fireplace.
What it costs in Colton
Chimney crown repair in Colton generally falls between $350 and $700 for a resurfacing job, with full re-pour work in the $900 to $1,600 range when the crown is too far gone.
How we do it
We remove loose concrete, fill small cracks with a flexible sealant, and either resurface the crown or form and pour a new one, making sure the top edge overhangs the brick to shed water properly.
Chimney Flashing Repair
Signs you need it
Water is leaking into the attic or around the ceiling near the chimney after rain, or the existing flashing is visibly rusted, lifted, or pulled away from the roof line.
What it costs in Colton
Chimney flashing repair here typically costs between $450 and $900, depending on whether we can patch the existing metal or need to replace the step and counter flashing.
How we do it
We remove the shingles around the chimney, cut and install new step flashing into the mortar joints, add counter flashing over it, and seal everything so water runs past the chimney instead of through it.
What Chimney Repair Costs in Colton
| Item | Typical range in Colton |
|---|---|
| Chimney cap installation | $280 – $520 |
| Chimney crown repair | $350 – $700 |
| Chimney flashing repair | $450 – $900 |
How do I know if my Colton chimney needs repair or just cleaning?
A cleaning removes creosote and soot. A repair fixes structural or water problems. If water is getting in, if the cap is missing, or if you can see cracks in the crown from the ground, you need repair work, not just a sweep. Call us at (877) 516-7159 and we’ll tell you which one you need.
Can you fix my chimney the same visit you sweep it?
In many cases, yes. If we find a cracked crown or a missing cap during the sweep, we can often do the repair on the spot as long as the materials are on the truck. Bigger jobs like liner replacement get scheduled separately. Call (877) 516-7159 for an exact quote.
Brands We Service in Colton
We stock and install Copperfield caps, DuraFlex liner systems, and HeatShield resurfacing materials on our Colton jobs. When parts are in our inventory, turnaround on cap and crown work is the same week. See our brands for the full lineup we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Colton, CA
| Service | Typical range in Colton |
|---|---|
| Chimney cap installation | $280 – $520 |
| Chimney crown repair | $350 – $700 |
| Chimney flashing repair | $450 – $900 |
What pushes a Colton quote higher is usually access. Older bungalow roofs near downtown can be steep, and chimneys on two-story Spanish-style homes need ladder setup that takes longer. Wind can also delay work on exposed roofs in the fall. You’ll get a flat price before we start, so there aren’t any surprises once the work is underway.
Neighborhoods We Serve in Colton
We work across all of Colton’s 92324 ZIP code, from the older streets near downtown and the La Cadena corridor to the tract neighborhoods south of the 10 and up toward the Reche Canyon side. Our schedule is usually running about three to five business days out for Colton calls, but it tightens up before the Santa Ana season when everyone remembers their chimney exists.
- Downtown Colton
- South Colton
- Terrace West
- Reche Canyon area
- Colton’s east side near Hunts Lane
Service Area – Cities Near Colton
We work throughout the Inland Empire beyond Colton. Our trucks cover Grand Terrace, CA, Highgrove, CA, Loma Linda, CA, and Rubidoux, CA regularly, along with the rest of San Bernardino and Riverside counties. If you’re in a neighboring city and wondering whether we make the drive, call us and ask.
Serving Colton, CA — Our Local Coverage Area
We’re based in the Colton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Colton
Most Colton appointments are scheduled within three to five business days, and we can often work around your schedule on weekdays. During the fall rush before Santa Ana season, availability tightens up, so calling ahead of the first cold snap is the best way to get a slot. Call (877) 516-7159 to check current availability.
Most cap, crown, and flashing repairs don’t require a permit in Colton. If the work involves a full liner replacement or structural rebuild, the city may ask for a permit, and we’ll handle the paperwork as part of the project. We’ll let you know before any work starts if a permit is needed for your specific job.
We cover all of Colton, including the 92324 ZIP code and every neighborhood in it. There’s no area we skip, and we schedule appointments throughout the week. If you’re not sure whether your address is in our service area, call (877) 516-7159 and we’ll confirm it while you’re on the phone.
If your Colton chimney needs a repair, a sweep, or a dryer vent that hasn’t been cleaned in years, call San Bernardino Chimney Sweep at (877) 516-7159 for a free estimate. We’ll come out, look it over, and tell you exactly what needs to be done and what it costs. No guesswork, no upselling.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Colton Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Jason Brooks"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Rafael Torres"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Priya Rao