Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Lomita
Dryer vent cleaning in Lomita typically costs $140 to $220 for a standard single-family home, with the job done in about an hour. The marine layer that hangs over Lomita most mornings changes how lint behaves inside your vent run, and it’s why so many homes here need attention sooner than homeowners expect. We know the 1940s and 1950s tract houses off Lomita Boulevard and the custom builds climbing toward the Palos Verdes foothills, because we’ve been working inside their walls and crawlspaces for years. Dryer Vent Cleaning is a core service for us, not a side gig, and we schedule Lomita calls throughout the week. Call (877) 516-7159 and we’ll get you on the board.
Why San Bernardino Chimney Sweep Is Lomita’s Preferred Dryer Vent Cleaning Company
We’re a specialist chimney and ventilation company, not a handyman service that squeezes dryer vents between bathroom remodels. That matters in Lomita because the vent problems here are rarely simple lint buildup. When we pull a vent line on a 1950s home near the Palos Verdes foothills, we’re looking at masonry penetrations, galvanized collars eating themselves from salt air, and flex runs that were installed long before modern code requirements existed. A generalist won’t catch what we do, and homeowners in Lomita call us specifically because we can fix what we find the same day.
Allen Prescott built this company around one idea: if you’re going to clean a chimney or dryer vent, you should be able to repair it too. We work with Dryer Vent Cleaning in Lomita homeowners who appreciate that we don’t hand them a camera image of a corroded collar and say “call someone else.” We carry the stainless replacements on the truck. We reseal masonry penetrations. We run the flow test before we pack up, so you know the air is actually moving.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Lomita
Dryer Vent Line Clearing and Flow Verification
Lint in Lomita doesn’t stay fluffy the way it does in dry inland heat. The marine moisture condenses inside the vent run, matting the lint into dense, felt-like plugs that restrict airflow far beyond what the outside of the vent suggests. We clear the full run from dryer to termination, then verify airflow with a flow test at the exterior outlet. If the numbers don’t match what a clear run should produce, we find out why before we leave. In Lomita, that “why” is usually a sagging flex run or a partially collapsed section behind a wall.
Stainless Vent Collar and Flashing Replacement
Original 1940s and 1950s Lomita homes often vent through exterior masonry walls with a galvanized collar and flashing that has spent decades in salt air. Galvanized steel fails here. The collar rusts through, the flashing lifts, and moisture works into the wall cavity around the vent opening. We replace failed collars with stainless steel and reseal the penetration with proper flashing so the salt-laden breeze off the coast can’t keep eating the metal. This is a Lomita-specific repair we do regularly that most general dryer vent companies won’t touch.
Roof-Level Cap and Crown Inspection Bundled with the Vent Check
Your dryer vent doesn’t exist in isolation from the rest of your roof. On a Lomita roof, the chimney cap, crown, and flashing are exposed to the same marine moisture that’s corroding your dryer vent collar. We bundle a roof-level cap and crown inspection with the vent check when the vent terminates through the roof, because homeowners on the same block often mistake a chimney problem for a dryer vent issue and vice versa. One trip, one clear picture of what’s actually happening at the roofline.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lomita
We use materials from contractors’ supply houses, not big-box retailers. For dryer vent repairs we keep Copperfield stainless collars and flashing components on hand, because they hold up to the salt air along the Palos Verdes foothills. When a Lomita chimney inspection uncovers liner damage, we can resurface with HeatShield or install a DuraFlex flexible liner system, meaning you won’t need a second company to come out for repairs after we clean. Contractor-grade materials, not hardware-store substitutes, because Lomita’s coastal exposure punishes anything less.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Lomita Homes
- Marine-layer lint matting. Moisture condenses inside the flex run and clumps lint into dense felt wads. Your dryer runs hot, your high-limit thermostat cycles, and your clothes still come out damp after two cycles.
- Salt-corroded collars and flashing at masonry penetrations. The galvanized collar that seals your vent where it exits through brick or block rusts through from constant coastal moisture. Air leaks back into the wall, and that’s how you get lint and humidity in places you really don’t want them.
- Undersized or sagging flex runs. Many original 1940s – 60s Lomita homes were built with short, direct vent paths. Modern dryers move more air, and long flex runs snaked through old framing create resistance and lint traps that shorter original runs never anticipated.
- Cross-diagnosed chimney smells. A musty or burning smell traced to the chimney often starts at the roof-level dryer vent cap or a failed vent collar near the chimney chase. We see this regularly on 1950s tract houses where the dryer vent and chimney share a chase.
Pricing for Dryer Vent Cleaning in Lomita, CA
A standard dryer vent cleaning in Lomita runs $140 to $220 for a single-family home with an accessible vent run. Longer runs over 20 feet or runs that terminate at a second-story roofline add $30 to $60. Stainless collar and flashing replacement at a masonry penetration is typically $80 to $150 depending on collar size and access. Roof-level cap and crown inspection bundled with a vent check adds $25 to $50, which is far less than a separate chimney inspection trip. We give you a flat price before we start, not after we see your house, and the estimate is free. Call (877) 516-7159 with a rough idea of your vent’s path and we’ll quote it over the phone.
We Also Serve Cities Near Lomita
Our trucks cover the South Bay and Palos Verdes corridor. We run regular calls in Torrance, Rolling Hills Estates, West Carson, and Manhattan Beach, and we schedule Lomita appointments throughout the week alongside those routes.
Serving Lomita, CA — Our Local Coverage Area
We’re based in the Lomita area and know this community well, providing Gelco service in Lomita. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Lomita
Because Lomita’s marine moisture mattes the lint inside your vent run into a felt-like plug long before it’s visible from the outside, and the lint screen only catches the loose surface lint. Your dryer can’t push air through a matted run, so the high-limit thermostat trips and your clothes stay damp. Call (877) 516-7159 and we’ll clear the run and verify the airflow with a flow test.
Yes, and it affects the metal parts first. Galvanized collars and flashing rust through within a couple of decades in coastal air, and once the collar fails, moisture and lint penetrate the wall cavity. We replace failed collars with stainless steel on Lomita homes regularly, so the salt air can’t eat the repair. Call (877) 516-7159 and we’ll check yours.
Yes, especially in 1940s and 1950s homes where the dryer vent and chimney share a chase or terminate near each other at the roofline. A rusted vent collar or a failed roof cap lets lint-laden air leak into the void, and the smell drifts into the chimney. We look at both systems on the same visit so you’re not chasing the wrong repair. Call (877) 516-7159 for a bundled inspection.
Every year, and some homes near the Palos Verdes foothills need it every nine to ten months when the marine layer is persistent. The moisture condenses inside the run and mats the lint faster than in dry inland areas like the Inland Empire or High Desert. If your dryer is taking longer on the same load or the exterior flap isn’t opening fully when the dryer runs, that’s your early warning. Call (877) 516-7159 for an annual cleaning.
It can be, because an unlined chimney and an adjacent vent run both depend on intact masonry and penetration seals that were never designed for coastal conditions. Older unlined chimneys in Lomita often have hairline cracks from decades of regional seismic activity, and if the dryer vent collar is also rusting out, moisture moves between the two systems inside your walls. We inspect both together and we’ll tell you plainly if work can wait or if it needs attention now. Call (877) 516-7159 for a combined assessment.
Written by Allen Prescott, Owner at San Bernardino Chimney Sweep, serving Lomita with dryer vent cleaning, chimney sweeping, and chimney repair.
Call (877) 516-7159 today for a free estimate on dryer vent cleaning in Lomita. We’ll give you a flat price before we start, show you camera images of anything we find, and only recommend work you can verify with your own eyes.