Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Norco, CA
Chimney repair in Norco usually means addressing cracked masonry crowns, rusted-out caps, and flashing failures on 1950s to 1980s ranch homes that have spent decades in hot, dry Inland Empire summers. Most of the chimneys we inspect here haven’t been touched since the house was built, and on horse properties the flue is often treated like just another outbuilding until something visibly fails. San Bernardino Chimney Sweep handles sweeping, repair, and dryer vent work in Norco as one specialized team, so when an inspection turns up damage, you’re not left searching for a second company. Call (877) 516-7159 for a free estimate.
Why Norco Homes Are Different
Norco is a horse-keeping town, and that shapes the chimney work we do here more than almost anything else. Homes sit on large lots with corrals, barns, and hay storage, and the same fine dust that settles across tack rooms and feed areas gets pulled into chimney flues during Santa Ana wind events. Open hearths and freestanding wood stoves in Norco see steady December-through-February use, which builds creosote faster than the occasional holiday fire would. The housing stock runs heavily to single-story ranch homes from the 1950s through the 1980s, and we regularly see original masonry fireplaces that were built well but haven’t had a proper inspection in decades. Additions and detached shops are common, which means flue runs are rarely standard. On the horse properties especially, technicians find chimneys capped with nothing but a rusted spark arrestor, or no cap at all. Norco’s dry climate bakes older chimney crowns until they crack, and once water gets into those cracks, the freeze-thaw cycles of even a mild winter start separating mortar joints. This isn’t a coastal chimney market where you’re mostly clearing nests. In Norco, the work is creosote removal, cap and crown repair, and keeping dry, dusty conditions from turning a small crack into a liner replacement.
Styles & brands we work with





Our Main Norco Services
Most Norco homeowners call us first for one of two things: a thorough sweep before or after burning season, or dryer vent cleaning when they realize their laundry room has become a fire risk they never thought about. Both are core services, not add-ons.
Chimney Sweep in Norco
A chimney sweep in Norco is usually more than a quick brush-through. Homes here burn real wood over long winter evenings, and horse property dust settles inside the flue during the off-season, so a proper sweep means removing creosote as well as the grit that Santa Ana winds push through uncapped or poorly capped chimneys. We inspect the flue as part of the job, because in Norco’s older housing stock, a sweep often uncovers crown cracks or cap damage that would otherwise go unnoticed. Learn more on our Chimney Sweep in Norco page.

Dryer Vent Cleaning in Norco
Dryer vent cleaning in Norco matters because the dust here doesn’t stay in the barn. Horse properties generate fine particulate from hay, shavings, and corral dirt that gets tracked into laundry rooms and pulled through dryer vents, where it mixes with lint and builds obstructions quickly. A clogged dryer vent is a leading cause of residential fires, and on a ranch property with animals nearby, the stakes are higher. This is a standalone service we perform as seriously as any chimney job. See our Dryer Vent Cleaning in Norco page for details.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Norco
Chimney repair in Norco comes down to two things: sun-baked masonry and exposed metal. The dry, hot summers crack crowns and mortar joints, while the seasonal moisture that does arrive works into those cracks and widens them. On horse properties, a rusted spark arrestor or missing cap often goes unnoticed because the chimney is just one more structure on a lot full of outbuildings. When we find damage during a sweep, we can usually fix it on the spot rather than handing you a report and a referral. That’s the whole point of having a Chimney Repair team that actually performs the work, not just the inspection.
Chimney Cap Installation
Signs you need it
Your chimney has no cap, or the existing one is so rusted and warped that rain, birds, and Santa Ana grit are getting straight into the flue.
What it costs in Norco
Chimney cap installation in Norco typically runs $150 to $450 depending on the flue size and the cap material you choose.
How we do it
We measure the flue opening, install a properly sized cap anchored to the crown, and confirm the spark arrestor mesh meets the needs of a semi-arid, high-dust environment.
Chimney Cap Replacement
Signs you need it
The old cap is rusted through, the mesh is torn or missing, or the cap has shifted and no longer sits flush on the flue.
What it costs in Norco
Chimney cap replacement in Norco usually falls between $200 and $500 depending on the cap size and whether the mounting hardware needs repair as well.
How we do it
We remove the failed cap, clean the flue top and mounting surface, and install a replacement built for Norco’s dry, wind-driven conditions.
Chimney Liner Installation
Signs you need it
Your flue liner is cracked, spalling, or missing sections, and the fireplace or stove is no longer venting safely.
What it costs in Norco
Chimney liner installation in Norco generally runs $1,200 to $4,000 depending on the liner type, length, and whether the existing flue needs prep work.
How we do it
We assess the existing flue, pull the old liner if present, and install a new DuraFlex flexible liner sized for your appliance and local venting requirements.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney, or the flashing at the roofline is lifting, rusted, or has visible gaps.
What it costs in Norco
Chimney flashing repair in Norco typically costs $300 to $800 depending on how much of the flashing needs to be removed and replaced.
How we do it
We cut out the old flashing, install new step and counter flashing sealed with materials suited to Norco’s hot roof surfaces, and test for leaks.
Chimney Crown Repair
Signs you need it
The concrete crown on top of the chimney is cracked, spalling, or holding water in low spots.
What it costs in Norco
Chimney crown repair in Norco generally costs $400 to $1,200 depending on how much of the existing crown can be salvaged.
How we do it
We clean and prep the damaged crown, fill cracks with a proper crown repair material, and when the damage is extensive we form and pour a new crown with a proper drip edge.
What Chimney Repair Costs in Norco
| Item | Typical range in Norco |
|---|---|
| Chimney cap installation | $150 – $450 |
| Chimney cap replacement | $200 – $500 |
| Chimney liner installation | $1,200 – $4,000 |
| Chimney flashing repair | $300 – $800 |
| Chimney crown repair | $400 – $1,200 |
In Norco, prices push toward the higher end when a ranch home’s chimney hasn’t been inspected in decades and multiple issues are found at once, or when access requires working around a steep roof pitch. We give you a firm price before work starts, and we don’t recommend repairs unless we can show you the problem on camera.
Do I really need a new liner, or can it be repaired?
If the liner has minor surface damage, we can often resurface it with HeatShield rather than replace it, which extends liner life without the cost and disruption of full liner replacement. We’ll show you camera footage of the damage before recommending either path. Call (877) 516-7159 for an exact assessment.
Can chimney repair be done the same day as a sweep?
Yes, in most cases we can handle cap replacement, crown patchwork, and flashing repair the same day as a sweep in Norco, since we carry common parts and materials on the truck. Larger liner work may need a follow-up visit. Call (877) 516-7159 to schedule a sweep and we’ll assess repair needs on-site.
Brands We Service in Norco
We install and work with professional-grade chimney components from Copperfield, DuraFlex, and HeatShield, which means the parts going into your Norco chimney aren’t hardware-store substitutes. Common caps, crown materials, and liner components are stocked on our trucks, so most repairs in Norco don’t wait on a parts order. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Norco, CA
| Service | Typical range in Norco |
|---|---|
| Chimney sweep (standard) | $179 – $259 |
| Chimney sweep (heavy creosote) | $259 – $379 |
| Chimney cap installation | $150 – $450 |
| Chimney cap replacement | $200 – $500 |
| Chimney liner installation | $1,200 – $4,000 |
| Chimney flashing repair | $300 – $800 |
| Chimney crown repair | $400 – $1,200 |
| Dryer vent cleaning | $110 – $250 |
What pushes a Norco chimney job higher is almost always deferred maintenance: years of Santa Ana grit, a rusted cap that let water in, or creosote buildup from a wood stove that hasn’t been swept in several seasons. The price we quote before starting is the price you pay, and we don’t add repair charges without showing you the problem on camera first.
Neighborhoods We Serve in Norco
We work across all of Norco’s ZIP code 92860, including the horse properties and older ranch subdivisions that define the city. Most appointments are scheduled within a few days depending on the season and the work needed.
- Norco Hills
- Bluff Street / Corydon area
- Valley View / River Road corridor
- Horse Town USA residential core
- Norco Ridge
Service Area – Cities Near Norco
Our chimney and dryer vent services extend to the communities around Norco, including Eastvale, CA, Home Gardens, CA, Corona, CA, and Jurupa Valley, CA. If you’re in a neighboring city and need a sweep, repair, or dryer vent cleaning, call (877) 516-7159 and we’ll confirm coverage for your address.
Serving Norco, CA — Our Local Coverage Area
We’re based in the Norco area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Norco
Most Norco appointments are scheduled within three to five business days, though peak burning season in December and January can push that out further. If you’re planning a sweep before heavy fireplace use, call (877) 516-7159 a few weeks ahead.
Most chimney repairs like cap replacement, crown repair, and flashing work don’t require a permit. Liner replacement and structural masonry work may require a permit depending on the scope, and we can advise you on what Norco and Riverside County require for your specific job.
Yes, we service both open fireplace flues and freestanding wood stove chimneys throughout Norco. Many Norco homes have original masonry fireplaces, but we also see plenty of wood stoves in dens and converted garages, and both need regular sweeping for safe operation.
If you’re in Norco and want a chimney swept, repaired, or a dryer vent cleared before it becomes a problem, call San Bernardino Chimney Sweep at (877) 516-7159 for a free estimate. We find it and we fix it, and we’ll show you the camera footage so you know exactly what’s happening in your flue.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Norco Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Priya Rao"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Ebony Nash"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Eric Rhodes