Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Inglewood
Dryer vent cleaning in Inglewood typically costs $130 – $230 for a standard single-story home, and most jobs are completed in under two hours. But if your home sits in the older core of 90301 or 90302, the conversation often starts with one question: where does that vent actually go? In the 1900s – 1920s bungalows around downtown Inglewood, many dryers exhaust into old brick flues that were never designed for lint-laden air, which means a simple cleaning sometimes reveals a bigger issue. Call (877) 516-7159 and we’ll bring a camera, not just a brush.
Why San Bernardino Chimney Sweep Is Inglewood’s Preferred Dryer Vent Cleaning Company
We’re a specialist, not a generalist. Our entire trade is chimneys and ventilation systems, and that narrow focus matters in a city like Inglewood where the housing stock is older than almost anywhere else in the South Bay. When you call us for Dryer Vent Cleaning, you get a tech who understands the difference between a dedicated metal vent run and an old unlined brick flue, and who knows why that difference matters on a 1925 Craftsman off Florence Avenue.
Inglewood homeowners tell us the same thing after we finish: they’d had the vent brushed before, but nobody ever showed them what was inside. That’s the gap we fill. We don’t just clear the lint. We scope the exhaust path with a camera and show you the footage, whether it’s clean, packed with lint, or running into a deteriorating flue that should never have been used as a dryer exhaust in the first place. Allen Prescott started this company with that exact philosophy: nothing gets recommended without evidence the homeowner can see for themselves.
We work across all four Inglewood ZIP codes, 90309, 90310, 90311, and 90312, and we know the pockets where vent problems cluster: the tree-lined streets of 90301 near Market Street, the Craftsman bungalows north of Manchester, and the 1940s tract homes in the outer ZIPs where the vents are shorter but the transitions are often poorly sealed. Response time to Inglewood is typically same-week, and we’ll give you a straight answer on the phone before we ever step foot in the house.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Inglewood
Dryer Vent Cleaning With Camera Scoping
We run a rotary brush through the vent, but we don’t stop there. Every cleaning includes camera scoping of the exhaust path so you can see what we’re seeing. In Inglewood’s older homes, that camera often reveals lint matted against spalling mortar joints inside a brick flue that was never meant to carry moist, lint-heavy air. The camera footage is yours to keep, and it’s what separates a real cleaning from a superficial pass.
Level 2 Inspection of the Flue Your Dryer Vents Into
This is the inspection most dryer vent companies skip. If your dryer exhausts into an old brick chimney in 90301 or 90302, we run a Level 2 inspection of that flue with the same camera we use for fireplaces. We’re looking for spalled brick, missing mortar, gaps in the clay tile liner, or a total absence of any liner at all. In Inglewood’s older housing stock, unlined flues are common, and a dryer pushing moist air into one accelerates deterioration every single cycle.
Dryer Vent Rerouting Away From an Unlined Brick Stack
When the camera shows a flue that can’t be safely used as a dryer exhaust, we’ll tell you plainly: cleaning it again won’t fix it. The right fix is rerouting the dryer to a dedicated metal vent run, and we quote that work separately with its own photos and measurements. No pressure. On a 1920s bungalow off Market Street in 90301, our tech pulled a dryer vent that had been tied into the original unlined brick flue, and the camera showed lint matted against spalling mortar joints and a flue liner that had never existed. We ran the vent brush, cleared the packed lint, and showed the homeowner the footage of the deteriorating mortar so they could see why the old stack wasn’t a safe dryer exhaust path, then quoted a proper reline and a dedicated metal vent run instead of upselling a cleaning that would never fix it.
Dryer Vent Transition and Connection Sealing
The connection where the flexible duct meets the wall or the rigid vent run is a common failure point in Inglewood homes, especially the 1940s and 1950s stucco tract houses in 90303, 90304, and 90305 where builders used short, awkward transitions. Lint collects at those junctions, airflow drops, and your dryer works harder. We replace crushed, kinked, or loose transitions as part of the cleaning when the camera or our hands find the problem. Small fix, real difference in dry time and fire risk.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Inglewood
We stock and service professional-grade components from Famco, Copperfield, and DuraFlex, not hardware-store substitutes. When a dryer vent needs a new cap, a rigid pipe section, or a transition, we’re installing the same brands a contractor would, and we can usually handle it the same day we’re on site in Inglewood. That matters in 90301 and 90302, where the vent run often has to be adapted to fit inside an old chimney chase or around original framing. If you need a full reline of the flue your dryer was vented into, we offer DuraFlex liner systems, and we’re certified to apply HeatShield resurfacing when the clay tile liner is compromised but the structure is still sound.
Common Dryer Vent Cleaning Problems We See in Inglewood Homes
- Dryer exhaust tied into an unlined brick flue. The 1900s – 1920s bungalows in 90301 and 90302 were built before modern venting codes, so many dryers push lint-laden moist air into stacks never designed for it. The lint packs against spalling mortar and the flue deteriorates from the inside out.
- Moist marine-layer air softening old mortar. Inglewood’s coastal-influenced climate means damp air sits against those old brick stacks year-round, even when the fireplace is never used. Inside a flue that’s carrying dryer exhaust, that moisture accelerates spalling, and a quick brush-only cleaning hides it completely.
- Lint packed against a liner that’s actually fine. Homeowners in 90301 and 90302 get sold a reline or a new vent run on the spot with no visible camera evidence, when the real problem is just lint packed tight against the liner. We show you the camera before we ever quote a repair.
- Vents that terminate inside a wall or crawlspace. In older Inglewood homes, we find dryer vents that were never run to the exterior at all, or that terminate in an attic, a wall cavity, or under the house. That’s a fire hazard and a moisture problem, and it’s one of the most common things a camera catches that a brush never would.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Inglewood, CA
A standard dryer vent cleaning in Inglewood runs $130 – $230, depending on the length of the vent run, how many transitions are involved, and whether we’re also scoping an attached chimney flue. If the dryer exhausts into an old brick flue and we’re running a Level 2 camera inspection of that stack at the same time, the combined visit typically runs $180 – $320. Rerouting a dryer away from an unlined brick flue with a dedicated metal vent run starts around $350 and goes up based on access and the length of the new run. If a full reline of the original flue is needed, we quote that separately with photos and a written scope. Every estimate is free, and we’ll tell you over the phone what to expect before we arrive. Call (877) 516-7159 for an exact quote.
We Also Serve Cities Near Inglewood
Our Dryer Vent Cleaning in Inglewood coverage extends into the surrounding South Bay communities. We serve Hawthorne, Del Aire, Lennox, and Alondra Park, which means if your street hugs the Inglewood city line, you’re still in our service area. Same crew, same camera-first approach.
Serving Inglewood, CA — Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Inglewood
Because so many Inglewood dryers exhaust into old brick flues, not dedicated metal vents. If your home was built between 1900 and 1930 in 90301 or 90302, the odds are higher that the dryer is pushing air into a flue never designed for it. We camera-scope that flue during the cleaning so we can see whether the vent run is clean and safe, or whether the flue itself is spalling and needs attention. Call (877) 516-7159 if you’re not sure where your dryer exhausts; the camera gives us a fast answer.
Yes, because the outside of a brick chimney tells you almost nothing about the inside. In Inglewood’s older 1920s bungalows, we routinely find flues that look solid from the street but are spalled, cracked, or completely unlined on the inside. The camera is the only way to see what’s actually happening, and it’s the reason we can tell you honestly whether a vent cleaning is all you need or whether the flue itself is the problem. You’ll see the footage with your own eyes before we recommend anything.
Every 12 to 18 months for most Inglewood homes. The marine layer and mild coastal air mean lint doesn’t dry as quickly inside the vent, which can lead to clumping even when you don’t use the dryer heavily. If your dryer vents into an old brick flue, the interval matters more: moist air and lint packed against old mortar accelerates deterioration, so we recommend an annual cleaning with camera scoping in those homes. Call (877) 516-7159 and we’ll help you set a realistic schedule based on your vent run.
In most cases, yes. Clay tile liners in 1920s chimneys were sized for fireplace exhaust, not the continuous moist, lint-laden air from a dryer. If the flue is unlined or the clay tiles are cracked, venting a dryer into it is a fire and moisture hazard. We’ll show you the camera footage, explain what we’re seeing, and walk you through your options, which include relining with a DuraFlex system or rerouting the dryer to a dedicated metal vent run. You don’t have to guess, and we don’t recommend work you can’t see.
Creosote is the combustible residue from burning wood, and it builds up inside fireplace flues. Lint is the fine fabric dust from your dryer, and it’s just as flammable, but it accumulates in an entirely different way: it packs against the walls of the vent or flue, traps moisture, and blocks airflow. Both are fire hazards, but you can’t treat them the same way. In Inglewood homes where a dryer vents into an old fireplace flue, you can have both problems in the same chimney, which is exactly why we camera-scope the full exhaust path. Call (877) 516-7159 and we’ll tell you what you’re actually dealing with.
Written by Allen Prescott, Owner at San Bernardino Chimney Sweep, serving Inglewood and the surrounding South Bay communities.
Get Your Dryer Vent Cleaned and Scoped Right
Inglewood’s older homes need more than a brush run. They need a specialist who will camera the exhaust path, show you what’s inside, and tell you plainly whether a cleaning is enough or whether the old brick flue needs attention. Call (877) 516-7159 for a free estimate. We’ll give you a straight answer on the phone, schedule a visit that works around your week, and leave you with footage and a report you can actually use.