Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Artesia
Dryer vent cleaning in Artesia typically costs $140 – $250 for a standard single-story home, with most jobs completed in under two hours. We know Artesia’s mid-century tract houses well because we work in them every week, from the older neighborhoods near Pioneer Boulevard down to the 90702 streets below the 91 Freeway. Lint doesn’t care what month it is, but a clogged vent gets dangerous fast when a cold snap pushes you to run the dryer back-to-back. Call us at (877) 516-7159 and we’ll schedule a sweep with a camera inspection included, so you see what we see before you spend a dollar on work that might not be needed.
Why San Bernardino Chimney Sweep Is Artesia’s Preferred Dryer Vent Cleaning Company
We’re a specialist, not a generalist. Homes in Artesia present a particular set of problems: 1950s – 1970s ranch houses with original masonry chimneys, clay tile liners, and dryer vents that were often routed through the same wall cavities as the flue. A handyman with a shop vac can’t diagnose that. Our Dryer Vent Cleaning team runs a camera through every duct we service, and when we find something wrong, we can fix it right then. That’s the whole point: we find it and we fix it.
Artesia homeowners call us because we work with contractor-grade materials, not hardware-store substitutes. When a crushed transition duct needs replacement, we install a smooth DuraFlex section. When a chimney liner is cracked behind a lint-packed vent, we can address it with HeatShield resurfacing instead of telling you to replace the whole thing. Allen Prescott runs our team with a simple rule: no homeowner gets a recommendation for work they haven’t seen with their own eyes on a camera screen. Nobody in Artesia should be upsold a liner replacement based on a tech’s gut feeling.
We cover the entire city, including both 90701 and 90702, and we’re typically on-site in Artesia within a few days of your call. Not because we cut corners, but because dryer vent cleaning is a core service for us, not an add-on we squeeze between roofing jobs.
Styles & brands we work with





Our Dryer Vent Cleaning Services in Artesia
Dryer Vent Cleaning
We disconnect the dryer, pull the lint, brush the full duct run from the appliance to the exterior termination, and run a camera to verify the vent is clear end to end. In Artesia’s milder climate, lint tends to accumulate in a thin, hard layer over months of sporadic use rather than piling up quickly. That’s actually worse in one way: it bakes into the duct walls and resists a quick vacuum pass. Our rotary brush setup breaks that crust loose, and the camera confirms it’s gone.

Level 2 Inspection
If we find airflow restriction that suggests a broken duct joint, a crushed pipe, or a nest, we recommend a Level 2 inspection. This uses a camera to map the entire vent path, including sections hidden inside walls and the chimney chase. Artesia’s older homes often have dryer vents running through the same cavities as clay tile chimney flues. A Level 2 inspection is how we determine whether lint is migrating into a cracked flue or just sitting in the duct.

Chimney Crown Repair
It sounds like a different trade, but it’s not. When a dryer vent shares a chase with a chimney, water intrusion at the crown runs down and damages the clay tile liner. That creates the cracks that let lint migrate into the flue. We repair crowns with proper mortar and matching materials, which stops the water before the liner gets worse. In Artesia, where original chimney crowns from the 1950s and 1960s are still in service, this is a common fix after a dryer vent inspection turns up spalling.

Dryer Vent Rerouting
Some older Artesia homes have vent runs that are too long, too kinked, or made of flexible foil that traps lint at every turn. When the camera shows us a path that will not stay clean no matter how often you service it, we can reroute the duct with smooth rigid pipe or DuraFlex where a short flexible connector is unavoidable. A shorter, straighter run means less lint buildup between cleanings and a dryer that doesn’t work twice as hard to dry one load.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Artesia
The parts we leave behind matter as much as the work we do. We stock DuraFlex vent and liner components, and we use Famco and Copperfield fittings when the job calls for a replacement cap, damper, or termination assembly. The big-box stuff rusts, separates, and pulls loose. When we install a Copperfield cap on an Artesia home, it stays put. If we find a liner issue, HeatShield gives us a repair path that doesn’t require tearing out your entire chimney. These are the brands we use because they last, not because they’re cheap.
Common Dryer Vent Cleaning Problems We See in Artesia Homes
- Lint-packed vents sharing a chase with cracked chimney liners. In mid-century tract homes, the dryer vent and the masonry chimney often occupy the same wall cavity. When the clay tile liner cracks, lint drifts into the flue and creates a fire path nobody sees without a camera.
- Glazed creosote from sporadic winter dryer use. Artesia’s short cold spells mean dryers run hard for a few weeks, then sit idle. That stop-start cycle bakes lint and crud into a hard glaze inside the duct, which is why simple vacuum cleaning doesn’t always work here.
- Lint smell mistaken for chimney odor. Homeowners near the 91 Freeway corridors sometimes report a “musty creosote smell” that actually comes from a nearly blocked dryer vent heating up during a cycle. By the time we’re called, the duct is usually 70 – 80% blocked.
- Crushed transition ducts behind the dryer. Many Artesia laundry rooms are small, and the original flexible duct gets shoved against the wall when someone pushes the dryer back. That kink traps lint, overheats the blower, and shortens the dryer’s life. We see this on nearly every first visit.
Pricing for Dryer Vent Cleaning in Artesia, CA
A standard dryer vent cleaning in Artesia runs $140 – $180 for a single-story home with a straight or slightly angled vent run under 15 feet. Longer runs, second-story terminations, or heavily glazed buildup push the price to $200 – $250. If we find a crushed duct or need to disconnect a stacked washer-dryer, that’s quoted before we start, not after. Rerouting a vent or replacing a termination cap is additional, and we give you a line-item price while the camera is still in the wall. All estimates are free, and no work begins until you approve the number. Call (877) 516-7159 and Allen’s team will give you an exact quote for your Artesia address.
See the difference
Before
After
Before
After
Before
AfterHow Artesia’s Mid-Century Homes Create a Unique Dryer Vent Problem
Here’s something you won’t read on a generic cleaning website. In many of Artesia’s older tract homes, especially those built between the 1950s and 1970s, the dryer vent and the masonry chimney occupy the same wall chase. The original builders ran the dryer duct up alongside the clay tile flue, sometimes within inches of each other. When the clay liner cracks, which it does after 40 to 60 years of thermal cycling, lint from the dryer vent migrates through the gaps and into the chimney flue. Now you have two separate fire risks sharing one wall, and neither is visible from the outside.
On a 1960s ranch house near the 91 Freeway in Artesia, we pulled a bird’s nest and a full lint trap from a dryer vent that had been routed through the chimney chase, then ran a camera to show the homeowner the cracked clay tile liner behind it, all before recommending any work. We cleared the vent, replaced the crushed transition duct with a smooth DuraFlex section, and scheduled a Level 2 inspection for the chimney to address the spalling mortar on the crown. In that job, the homeowner could see everything on the screen. Nothing was recommended that the camera didn’t show. That’s how we operate in Artesia.
Artesia’s mild Mediterranean climate makes this worse in a specific way. Fireplaces and dryers both go through long idle stretches, then suddenly work hard when a cold snap hits in December or January. Creosote builds slowly in the flue. Lint bakes into the vent. When the two are interconnected through a cracked liner, the same cold snap that makes you light the fireplace and run the dryer all weekend is the moment the hidden risks align. That’s why an annual or semi-annual dryer vent cleaning here isn’t just a maintenance chore. It’s a diagnostic event that tells you what’s happening inside the wall.
What Happens When Artesia Homeowners Delay Dryer Vent Cleaning
The first sign is usually a dryer that takes two cycles to dry a load. Then the laundry room gets warm during a cycle, or the dryer’s exterior feels hot to the touch. A lint smell that lingers, or a faint burning odor, means the vent is already dangerously restricted. In Artesia’s older homes, this smell is often mistaken for chimney creosote. Homeowners call a chimney sweep thinking the fireplace is the problem. When we show up with a camera and check the vent, the lint plug is the actual culprit. These are the situations where a simple cleaning finds a cracked flue behind the vent, and the job becomes a repair that prevents a fire instead of a cleaning that delays one.
Skipping a seasonal sweep means the dryer runs hotter, the vent gets tighter, and the blower motor works against more resistance until it fails. A replacement motor costs more than several years of cleanings. The fire risk is real: lint is fuel, and a blocked vent inside a wall cavity full of combustible framing turns a hot dryer into an ignition source. We never use scare tactics, but we do tell the truth about what the camera shows. If the vent is clean and you can wait, we say so. If it isn’t, you’ll see it.
We Also Serve Cities Near Artesia
If you’re in Cerritos, La Palma, Hawaiian Gardens, or Norwalk, our service area covers you too. We run routes through all of these communities every week and know the housing patterns and vent problems specific to each. Whether you found us searching for Dryer Vent Cleaning in Artesia or live just over the city line, the same camera-first standard applies.
Serving Artesia, CA — Our Local Coverage Area
We’re based in the Artesia area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Artesia
Annually is the minimum for most Artesia homes, and twice a year makes sense if you run the dryer daily or have a long vent run. Homes with original clay tile flues sharing a wall chase with the vent should be inspected every year regardless of use, because the risk is structural, not just about lint volume. Call (877) 516-7159 and we’ll set a schedule that matches how you actually use the dryer.
Yes. In homes where the dryer vent runs through the same wall chase as the chimney, lint can migrate through cracks in the clay tile liner and into the flue. That creates a second fire path and contaminates the chimney with a substance that doesn’t belong there. We’ve found exactly this condition in Artesia’s mid-century tract homes, and it requires both vent and chimney work to correct.
Artesia’s mild winters mean long stretches of no fireplace use, followed by sudden cold snaps that push homeowners to burn continuously for several days. That infrequent but intense burning pattern creates rapid, thick creosote deposits. When combined with the dry climate and little rain, the creosote can glaze over into the hard, shiny third-degree form that resists standard brushing and requires specialized chemical treatment. This same pattern affects dryers, where lint bakes into the vent walls over months of sporadic use.
A Level 1 inspection is a visual check of the vent’s accessible sections, plus a camera run through the visible duct. A Level 2 inspection is more thorough: it maps the entire vent path, including wall cavities, the chimney chase, and areas you can’t see from either end. For Artesia’s older homes where the vent may share space with a cracked flue, a Level 2 inspection tells us whether lint is staying in the duct or migrating where it shouldn’t. Call (877) 516-7159 to book either level.
Yes. We cover all of Artesia, including the 90701 area north of the 91 Freeway and the 90702 neighborhoods to the south. We also run routes into Cerritos, La Palma, Hawaiian Gardens, and Norwalk, so we can usually bundle your visit with other stops in the area rather than making you wait a week.
Contact San Bernardino Chimney Sweep in Artesia
If your dryer has been taking two cycles to finish a load, or the laundry room feels warm during a cycle, call us before the vent gets worse. We’ll send a technician to your Artesia home with the right brushes, a camera, and the parts to fix what we find. Estimates are free. No work happens until you approve a line-item price. Call (877) 516-7159 today, and Allen’s team will get you on the schedule.
Written by Allen Prescott, Owner at San Bernardino Chimney Sweep, serving Artesia with dryer vent cleaning, chimney sweeping, and chimney repair.