Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Bloomington, CA
Chimney repair in Bloomington usually means fixing what decades of inland heat, Santa Ana winds, and seasonal burning have done to a masonry fireplace built between the 1940s and 1970s. We’re San Bernardino Chimney Sweep, and we handle chimney work differently than a general contractor would: we inspect, we diagnose, and we fix it with contractor-grade materials rather than whatever is cheapest on the shelf. If you’re in the 92316 ZIP and your fireplace has been idle since last winter, call us at (877) 516-7159 and we’ll take a look before the next burn season starts.
Why Bloomington Homes Are Different
Most Bloomington homes are single-story stucco tract houses or ranch-style builds from the mid-20th century, and a lot of them still have their original brick or block masonry fireplaces. These chimneys weren’t built for modern burning habits. They were built for occasional wood fires, and now they sit through long, hot, dry summers where temperatures climb past 100 degrees and the air barely moves unless a Santa Ana is blowing through.
That idle season is when the real problems start. Wind pushes tumbleweed, palm fronds, and fine dust into uncapped flues. Birds and bees find their way in and build nests. Then winter arrives and homeowners start burning wood again, often in a flue that’s partially blocked or lined with creosote from the previous season. We find more nests and wind-driven debris in Bloomington chimneys than we do heavy soot in most cases. That changes how we approach an inspection here: before we even think about sweeping, we’re checking for animal activity, wind damage, and cracked crowns that let rain from the occasional winter storm seep into the brickwork.
Styles & brands we work with
Our Main Bloomington Services
Two services account for most of the calls we take from Bloomington homeowners: chimney sweeping before and during burn season, and dryer vent cleaning for houses where the laundry room has never had its vent line inspected.
Chimney Sweep in Bloomington
A chimney sweep in Bloomington is less about removing heavy soot and more about clearing what the dry season left behind: nests, dust, tumbleweed, and the creosote that builds up during concentrated winter burning. We run a full inspection before and after sweeping so you know exactly what was in the flue and whether anything needs repair. If we find damage, we can fix it on the spot instead of handing you a report and telling you to find another company. Chimney Sweep in Bloomington covers the full process and what to expect.
Dryer Vent Cleaning in Bloomington
Dryer vents in Bloomington clog with lint and dust faster than homeowners expect, especially in older homes where the vent line runs a long distance from the laundry room to the exterior. A restricted vent makes your dryer work harder, wastes energy, and creates a fire risk that has nothing to do with your fireplace. We treat dryer vent cleaning as a core service, not an add-on, because the same wind and dust conditions that affect chimneys also affect exterior vent terminations. Dryer Vent Cleaning in Bloomington explains the process and the signs of a blocked vent.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Bloomington
Most chimney repair work in Bloomington comes down to one of two scenarios: either the flue has deteriorated to the point where it’s no longer safely containing smoke and heat, or the chimney’s exterior has cracked enough to let water and wind into the masonry. Homes built from the 1940s through the 1970s often have original clay tile liners that are now cracked, spalling, or missing sections. Years of hot, dry summers followed by winter burning cycles take a toll on mortar joints and crowns, and the strong winds don’t help.
We repair chimneys with the same materials we’d want in our own homes: DuraFlex stainless liners when a liner needs replacement, HeatShield resurfacing when the existing liner can be salvaged, and Famco or Copperfield caps and components that hold up to real weather. Because we’re a specialist, we find it and we fix it in the same visit, so you’re not waiting on a second company to show up. Our Chimney Repair service covers the full scope of what we do.
Chimney Cap Installation
Signs you need it
You can see daylight through the top of your flue with no cap, or you’ve found bird nests, dead bees, or wind-blown debris inside the firebox.
What it costs in Bloomington
A standard cap installation in Bloomington typically runs $280 to $420 depending on flue size and the cap needed.
How we do it
We measure the flue, install a correctly sized cap with a secure mechanical fastening, and verify the draft isn’t restricted.
Chimney Liner Installation
Signs you need it
Your chimney has cracked clay tiles, missing mortar joints, or smoke pushing into the house during fires, which means the liner is no longer containing the flue gases.
What it costs in Bloomington
A new liner installation in Bloomington usually falls between $2,500 and $5,400 depending on length, access, and whether we’re relining an existing flue or installing new.
How we do it
We run a camera inspection to confirm the damage, size the correct DuraFlex liner for your flue, and install it so the chimney is safe to use again.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, or the flashing has pulled away from the roofline and is letting rain run down the brick.
What it costs in Bloomington
Flashing repair in Bloomington typically costs $350 to $750 depending on how much of the existing flashing needs to be replaced.
How we do it
We remove the old flashing, check the surrounding roof penetration, and install new flashing that seals tight against the chimney and roofline.
Chimney Crown Repair
Signs you need it
The concrete crown on top of your chimney is cracked, spalling, or missing chunks, which lets water soak into the masonry below.
What it costs in Bloomington
Crown repair in Bloomington usually runs $500 to $1,100 depending on crack severity and whether a full recast is needed.
How we do it
We assess the damage, remove loose material, and rebuild or reseal the crown so water can’t penetrate the chimney structure.
What Chimney Repair Costs in Bloomington
| Item | Typical range in Bloomington |
|---|---|
| Chimney cap installation | $280 – $420 |
| Chimney liner installation | $2,500 – $5,400 |
| Chimney flashing repair | $350 – $750 |
| Chimney crown repair | $500 – $1,100 |
How do I know if my chimney needs repair or just a sweep?
During our inspection we look for structural issues a sweep won’t fix: cracked liners, damaged crowns, failing flashing, and missing caps. If we find damage, we show you the photos and explain whether it’s urgent or can wait. Call (877) 516-7159 and we’ll give you a straight answer, not a scare tactic.
Can you repair my chimney the same day you inspect it?
For cap installation, flashing work, and most crown repairs, yes, we often carry the materials on the truck and can complete the repair during the same visit. Liner installation is a bigger job that we schedule separately. Call (877) 516-7159 and we’ll tell you what to expect before we arrive.
Brands We Service in Bloomington
We work with a curated set of professional chimney brands because Bloomington homeowners deserve materials built for this climate, not whatever is cheapest at the hardware store. DuraFlex liners, HeatShield resurfacing, and Famco and Copperfield caps and components are what we stock and install. Check our brands to see the full lineup and what each one does.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Bloomington, CA
| Service | Typical range in Bloomington |
|---|---|
| Chimney sweep (standard) | $180 – $340 |
| Chimney cap installation | $280 – $420 |
| Chimney liner installation | $2,500 – $5,400 |
| Chimney flashing repair | $350 – $750 |
| Chimney crown repair | $500 – $1,100 |
| Dryer vent cleaning | $130 – $285 |
Prices in Bloomington push upward when a chimney has gone years without maintenance and needs more than a basic sweep. Two-story roofs, difficult access, and flues full of animal nests or wind debris can also add to the labor. You get a flat price before we start work, so there are no surprises on the invoice.
Neighborhoods We Serve in Bloomington
We cover the entire 92316 ZIP and the surrounding residential pockets of Bloomington. Most of our work takes us to the older tract home neighborhoods along Cedar and Linden Avenues, the ranch-style houses near Bloomington High School, and the quieter streets off Slover and Jurupa where many homes still have their original fireplaces.
- Cedar Avenue corridor
- Linden Avenue area
- Near Bloomington High School
- Slover Avenue neighborhoods
- Jurupa Avenue tract homes
We typically reach most Bloomington addresses within 30 to 45 minutes from San Bernardino, depending on traffic on the 10.
Service Area – Cities Near Bloomington
Beyond Bloomington, we serve the surrounding Inland Empire communities with the same chimney and ventilation services. If you’re in a neighboring city and want a company that actually understands this climate and housing stock, we cover Fontana, CA, Rialto, CA, Glen Avon, CA, and Pedley, CA as well. Call (877) 516-7159 and we’ll confirm we can get to your address.
Serving Bloomington, CA — Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Bloomington
Most Bloomington addresses are 30 to 45 minutes from our San Bernardino base, so we can usually schedule an inspection within a few days. During the fall rush, demand picks up and lead times stretch, so calling (877) 516-7159 before the first cold snap is the smart move.
For most standard repairs like cap installation, flashing work, and crown repair, no permit is required. If a full liner replacement or structural rebuild is needed, San Bernardino County may require one, and we’ll tell you before any work starts. Call (877) 516-7159 if you want a clearer answer for your specific chimney.
We service freestanding wood stoves and their flue systems, which are common in some of the older Bloomington houses. The inspection focuses on the stovepipe, the thimble where it enters the wall, and the flue above it. Call (877) 516-7159 and describe your setup, and we’ll tell you whether it’s something we can handle the same week.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Bloomington Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Danielle Vaughn"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Jason Brooks"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Rafael Torres