Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Burbank, CA
Chimney repair in Burbank usually starts with a cracked clay tile or a rusted damper hiding inside a 1920s masonry flue. We work on more original brick fireplaces here than almost anywhere else in the Valley, and the hot, dry summers plus Santa Ana winds harden creosote into a glaze that a basic sweep won’t remove. San Bernardino Chimney Sweep handles both the cleaning and the repair so you don’t call a second company when the camera finds damage. Call (877) 516-7159 when you’re ready to have it looked at.
Why Burbank Homes Are Different
Burbank’s chimney work is defined by the housing stock. The 1920s to 1940s Spanish Colonial Revival and Craftsman bungalows in Magnolia Park and the Rancho area still carry their original shallow brick fireboxes. Many of those flues are unlined or built with clay tile that has cracked after eighty to a hundred years of heating and cooling. We see the same pattern on block after block: hairline cracks in the clay, a damper that won’t seat, and mortar joints that have turned to sand.
The climate makes it worse. Burbank’s San Fernando Valley summers are long, hot, and bone dry. A fireplace sits dormant from May through November, and during those months any creosote left from last winter bakes onto the flue walls. By the time Santa Ana winds kick up in the fall, that creosote has glazed over and hardened. Dry-rotted chimney caps and cracked flashing are common too, and the first real winter rain is usually when homeowners notice the water stain on the ceiling.
There’s also the air quality piece. Burbank falls under the South Coast Air Quality Management District, which issues No Burn Days through the winter. Homeowners here are asking more often about gas log conversions and fireplace inserts during the same visit we’re diagnosing flue damage, because they want a fire they can actually use on the days burning wood is prohibited.
Styles & brands we work with
Our Main Burbank Services
Most Burbank homeowners call us for one of two reasons: the fireplace hasn’t been cleaned in years, or the dryer vent is blowing hot air and taking forever to dry a load. Both are fire risks, and both are things we handle in a single visit.
Chimney Sweep in Burbank
An annual sweep is the baseline for any Burbank fireplace, but older homes with original flues often need more than a basic brushing. We run a camera through the flue as part of the sweep so you see exactly what we see, whether that’s glaze-stage creosote or a hairline crack in a clay tile. Because we also repair chimneys, the sweep report turns into a fix instead of a referral. For the full scope of what the cleaning covers in Burbank, see our Chimney Sweep in Burbank page.
Dryer Vent Cleaning in Burbank
Dryer vents are the chimney equivalent most people ignore. In Burbank’s older homes, a dryer vent often runs up through a wall or attic space where lint accumulates over years, especially when the run is long or has tight bends. It reduces dryer efficiency and creates a fire hazard. We clean the full vent run, not just the first few feet at the back of the machine. Our Dryer Vent Cleaning in Burbank page covers what’s involved and what Burbank homeowners typically pay.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Burbank
Chimney repair in Burbank is usually about age. A forty-year-old roof might have been replaced twice, but the chimney underneath it has never been touched. We open up the flue with a camera and find cracked clay tiles, loose mortar, and dampers that seized shut decades ago.
Because Burbank sits under AQMD wood-burning rules, many homeowners ask us to assess whether the fireplace is worth repairing at all or whether a gas conversion makes more sense. We’ll tell you plainly. If the flue can be brought back with a Chimney Repair like a new damper or crown, we say so. If the liner is shot and it’s time for a real decision, we show you the camera footage and walk through the options.
Chimney Cap Installation
Signs you need it
Rain dripping into the firebox, birds or squirrels getting in, or a cap that’s missing entirely after a Santa Ana wind event.
What it costs in Burbank
A new chimney cap in Burbank typically runs $200 to $600 depending on the flue size and whether a custom stainless steel cap from Copperfield is needed.
How we do it
We measure the flue opening, check the crown for cracks, and install a cap sized to keep water and animals out while keeping the draft open.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the fireplace or rust staining on the exterior masonry where the chimney meets the roofline.
What it costs in Burbank
Flashing repair in Burbank is usually $450 to $1,000 when we’re replacing the step flashing and sealing the joints; open roof access and older roof surfaces push it toward the top of that range.
How we do it
We remove the failing flashing, reset it against the chimney and roof deck, and seal the joint so the next winter’s rain doesn’t get behind the wall.
What Chimney Repair Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Chimney cap installation | $200 – $600 |
| Chimney flashing repair | $450 – $1,000 |
| Chimney crown repair | $300 – $800 |
Does a cracked chimney liner need replacing every time?
No. A hairline crack in a clay tile is common and often stable for years. We only recommend relining when the camera shows the crack has widened, the tile has shifted, or heat and gases can reach the surrounding structure. You’ll see the footage before you decide.
Can Burbank’s No Burn Day rules affect a repair?
They don’t stop repairs, but they often change the conversation. Some homeowners choose to convert to gas or install an insert instead of rebuilding a damaged wood-burning flue, so they can use the fireplace on any day. We’ll quote both paths and let you decide.
Brands We Service in Burbank
We install and work with professional-grade chimney components from DuraFlex, HeatShield, Gelco, and Copperfield. These are contractor-grade materials, not hardware-store substitutes, and we keep common Burbank sizes stocked so most repairs don’t wait on a special order. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Chimney sweep (inspection included) | $180 – $340 |
| Chimney cap installation | $200 – $600 |
| Chimney cap replacement | $250 – $650 |
| Chimney liner installation | $2,500 – $6,000+ |
| Chimney flashing repair | $450 – $1,000 |
| Chimney crown repair | $300 – $800 |
| Dryer vent cleaning | $120 – $250 |
In Burbank, prices move up when we’re working on a steep hill roof in the Verdugo-adjacent neighborhoods, when the flue is unusually tall, or when a repair requires matching old Spanish Revival brick. We give you a flat price before any work starts, and nothing gets added on after the fact.
Neighborhoods We Serve in Burbank
We work throughout Burbank’s single-family neighborhoods, from the original bungalow streets to the ranch homes up in the hills. Our crews know the local roof lines and the chimney styles that come with them.
- Magnolia Park
- Rancho
- The Verdugo-adjacent hills
- Northwest Burbank (91501, 91502)
- Near the airport (91523, 91526)
Most Burbank appointments are scheduled within a week, and we route multiple stops in the same area to keep the visit efficient.
Service Area – Cities Near Burbank
In addition to Burbank, we serve the surrounding San Fernando Valley and Los Angeles County cities. That includes Universal City, CA, North Hollywood, CA, Glendale, CA, and Studio City, CA.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burbank
Most Burbank appointments happen within five to seven business days. If you’re trying to get the fireplace ready before a specific date, call (877) 516-7159 and we’ll tell you the next open slot for your ZIP code.
Most standard chimney repair work like cap installation, flashing repair, and crown work doesn’t require a Burbank building permit. Full liner replacement or structural masonry work may trigger one depending on scope, and we’ll tell you before anything is scheduled.
Yes. We route experienced crews to Burbank regularly, and the company has served Burbank since 2018. You get the same specialist team and the same upfront flat pricing whether we’re working in Magnolia Park or up against the Verdugo hills. Call (877) 516-7159 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Danielle Vaughn"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Jason Brooks"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
— Rafael Torres