Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Silver Lakes, CA
Chimney repair in Silver Lakes usually starts with a $195 inspection because most of the homes here were built between 1980 and 2005 with prefabricated metal flues or early inserts, not traditional masonry. At this elevation, cold high-desert nights push fireplaces and wood stoves into heavy seasonal use, and the dry Mojave winds accelerate wear on caps, crowns, and flashing. We’re San Bernardino Chimney Sweep, and we handle repair, sweeping, and dryer vents so you don’t have to chase a second company when inspection turns up damage. Call (877) 516-7159 to schedule.
Why Silver Lakes Homes Are Different
Silver Lakes is a master-planned golf and resort community built around two man-made lakes, sitting at roughly 2,300 to 2,400 feet west of Barstow. The housing stock is mostly single-story stucco from the 1980s through early 2000s, with concrete tile or Spanish-style roofs. Many of these properties are second homes or snowbird retreats, which means a chimney can sit dormant from April through November with no one watching it. We routinely arrive at a Silver Lakes home to find a flue packed with desert bird nests, a cap clogged with wind-blown debris, or creosote glaze baked hard from last winter’s fires. The inspection matters as much as the sweep, because the homeowner wasn’t there to see the warning signs. Tile roofs also change how we work: ladder placement is tighter, setbacks are narrow, and walking a Spanish tile roof requires more care than an asphalt shingle roof in a standard tract development.
The elevation makes a real difference too. Silver Lakes sees genuine hard freezes on winter nights, so freeze-thaw cycles stress chimney crowns and flashing joints more than you’d expect in the Mojave. Dry, gusty conditions push fine dust and sand into spark arrestors and caps. When a fire hasn’t been lit in eight months and the flue has been quietly collecting whatever the desert wind carries, a sweep here is not a formality. It’s the difference between a clean burn and a chimney fire that starts behind the tile roof.
Styles & brands we work with
Our Main Silver Lakes Services
Two services account for most of the calls we get in Silver Lakes. Both are safety work, and both are jobs where a specialist catches what a generalist misses.
Chimney Sweep in Silver Lakes
A proper sweep in Silver Lakes starts with a camera inspection, because in a community where chimneys hibernate for months, you need to see what’s inside before any brush touches the flue. We remove creosote, clear bird and rodent nests, clean spark arrestors and caps, and document everything with photos. In a Silver Lakes home with a prefabricated metal fireplace, we use the manufacturer’s specified brush method rather than treating every flue the same. If we find damage, we can repair it on the spot. Chimney Sweep in Silver Lakes
Dryer Vent Cleaning in Silver Lakes
A dryer vent packed with lint is a fire risk, and in Silver Lakes homes that sit empty for months, lint can cake with dust and desert debris while nobody realizes it. We clean the full vent run from the dryer to the exterior termination, verify airflow, and show you what came out. It’s not an add-on we squeezed into the business model; it’s a listed service with the same inspection standard as the chimney work. Dryer Vent Cleaning in Silver Lakes
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Silver Lakes
Chimney repair in Silver Lakes usually means two things: cracked flashing or crowns from hard freeze-thaw cycles, and damaged liners in prefabricated metal flues that have been burning hot for twenty winters. In a home where the fireplace sat unused for eight months, the first sign of trouble is often a leak stain on the ceiling or a rust bloom on the firebox walls. We do the repair work here, not just the diagnosis, using contractor-grade materials from brands like Chimney Repair specialists trust.
What we find under the tile is often hidden until a camera goes up the flue. A cracked crown lets water into the chimney chase. A failed flashing joint lets rain run down the exterior and into the drywall around the fireplace. And in factory-built systems, a damaged liner panel is a direct fire and carbon monoxide hazard that needs attention before the next cold night.
Chimney Cap Installation
Signs you need it
If you can see daylight where a cap should be, or the existing cap rusted through at the mesh and left gaps big enough for a bird, it’s time.
What it costs in Silver Lakes
Chimney cap installation in Silver Lakes typically runs $200 to $400, including the cap and the labor to secure it at the flue termination.
How we do it
We measure the flue, match the cap to the system, secure it mechanically, and confirm the mesh is seated so birds and wind-driven debris stay out.
Chimney Crown Repair
Signs you need it
Hairline cracks across the crown, spalling concrete at the edges, or water staining on the ceiling below the chimney chase are the big three.
What it costs in Silver Lakes
Crown repair in Silver Lakes usually lands between $450 and $700, depending on whether we’re sealing small cracks or rebuilding the surface.
How we do it
We clean the crown, fill and seal cracks with a flexible crown sealant, and reset the slope so water runs off instead of pooling and soaking into the masonry.
What Chimney Repair Costs in Silver Lakes
| Item | Typical range in Silver Lakes |
|---|---|
| Chimney inspection with camera | $195 |
| Chimney cap installation | $200 to $400 |
| Chimney crown repair | $450 to $700 |
Prices shift in Silver Lakes when we’re working on a tile roof with tight ladder access, or when a factory-built flue needs manufacturer-specific parts that aren’t stocked at the corner hardware store. We give you the price before work starts, and the estimate holds.
How long does chimney repair take in Silver Lakes?
Most cap and crown jobs are done in a single visit, typically two to four hours depending on roof access and what the inspection reveals. Liner work can run a full day.
Can you repair my Silver Lakes chimney without replacing the liner?
Often yes. If the liner is intact but the crown, cap, or flashing failed, we repair those without touching the liner. When the liner itself is compromised, HeatShield resurfacing may extend its life without a full replacement.
Brands We Service in Silver Lakes
We work with a curated lineup of professional brands, not whatever is cheapest on the shelf. That means DuraFlex liner systems for relining work, HeatShield for flue resurfacing, and parts from Famco and Copperfield when a cap or termination needs replacing. Stocking contract-grade components locally means shorter turnaround on Silver Lakes repair jobs. See our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Silver Lakes, CA
| Service | Typical range in Silver Lakes |
|---|---|
| Chimney inspection with camera | $195 |
| Chimney sweep (full cleaning) | $179 to $219 |
| Chimney cap installation | $200 to $400 |
| Chimney crown repair | $450 to $700 |
| Chimney flashing repair | $300 to $600 |
| Chimney liner installation (DuraFlex) | $2,500 to $5,000 |
| Dryer vent cleaning | $129 to $189 |
In Silver Lakes, the price goes up when tile roof access is tight, when a prefabricated flue needs a manufacturer-specific part, or when we have to clear a serious bird or rodent nest before the actual sweep starts. You’ll always get the number upfront, and it doesn’t change once we’re on the ladder.
Neighborhoods We Serve in Silver Lakes
We cover all of Silver Lakes, 92342 and the surrounding high-desert streets. Most of the community is concentrated around the two lakes and the golf course, with single-story stucco homes on compact lots. Response time in the area is typically one to three business days, and we group visits where we can so a second-or third-home owner doesn’t have to open the house more than once.
- North Silver Lakes
- South Silver Lakes
- The Fairways
- Lakeshore communities
- Silver Lakes Country Club estates
Service Area – Cities Near Silver Lakes
We also run regular routes through the surrounding High Desert cities. If you’re in Adelanto, CA, Victorville, CA, Mountain View Acres, CA, or Spring Valley Lake, CA, the same crew and the same camera inspection standard apply. A chimney in Victorville sees the same wind and freeze cycles as one in Silver Lakes, and the repair needs follow.
Serving Silver Lakes, CA — Our Local Coverage Area
We’re based in the Silver Lakes area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Silver Lakes
Most Silver Lakes calls are scheduled within one to three business days. For a second home or snowbird property that’s been closed up, we can coordinate a specific window so you don’t have to leave the house open.
Some Silver Lakes HOAs have rules about roof access or exterior changes like caps and terminations, but most routine sweep and repair work falls under standard maintenance. We’re used to working around HOA requirements and can tell you what to check before we start.
Yes, and that’s the whole point of hiring a specialist. If the camera inspection during a sweep turns up a cracked crown or failing cap, we can typically repair it on the same trip instead of asking you to call a second company and restart the process.
For honest, straight answers about your Silver Lakes chimney, call (877) 516-7159 for a free estimate. We’ll tell you what’s actually wrong, what can wait, and what it costs before any work starts.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Silver Lakes Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Priya Rao"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Ebony Nash"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Eric Rhodes