Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Crestline, CA | San Bernardino Chimney Sweep
We provide independent DuraFlex chimney cleaning and inspection across Crestline, CA, zip code 92325. What makes our DuraFlex work different here is straightforward: Crestline’s older cabins often have stainless liners installed into masonry chimneys that were never built for a liner at all, and a standard sweep misses what’s actually happening inside those corrugations. We clean, camera-inspect, and repair DuraFlex systems with OEM parts, and we tell you plainly when a liner is sound or when it’s cooked. Call (877) 516-7159 for a free estimate.

We’re San Bernardino Chimney Sweep, and DuraFlex sales & service is part of what we do daily across the mountain communities. We’re independent, not manufacturer-affiliated, so our recommendation is based on what your liner actually needs, not what we’re told to sell.
Why Crestline Residents Choose Us for DuraFlex Service
DuraFlex liners are common in Crestline because they’re the practical fix for older fireplaces and retrofitted wood stoves. But a liner is only as good as how it was installed and how it’s been maintained. We know the failure points on these systems because we’ve spent a long time pulling, re-lining, and sealing DuraFlex stainless liners in mountain cabins where the original chimney was never sized for the stove that got installed.
Allen Prescott, our owner, grew up near the Kendall Drive corridor in San Bernardino and has worked on Inland Empire chimneys for the better part of three decades. He built this company on straight talk: we show you exactly what we found in your flue, why it matters, and what needs to be done now versus what can wait. In Crestline specifically, that matters because insurance inspections and forest-boundary fire rules don’t leave much room for “maybe.”
We stock OEM DuraFlex liner sections, top plates, and adapters where they’re available. When OEM parts are discontinued or backordered, we use quality aftermarket caps and hardware, and we tell you which you’re getting. No mystery pieces. We serve the full Crestline service area, and because we’re already working the mountain roads each week, scheduling a sweep plus inspection doesn’t take weeks.
Styles & brands we work with





Common DuraFlex Chimney Cleaning Problems We Solve in Crestline
- Glazed creosote baked into the stainless corrugations. At 4,600 feet, Crestline winters drive heavy wood-stove use from late fall through early spring. The glaze hardens in the valleys of the corrugation, where a standard poly brush just skates over the top. We use a rotary poly whip to break it loose.
- Liner joints and top adapter plates degrading from freeze-thaw cycles. Snow loads sit on Crestline roofs every winter, and the repeated freeze-thaw works fasteners loose. We find shifted liner tops and loose bands on chimneys that looked fine from the ground. A Level 2 camera inspection catches this before the draft dies or the cap lets rain in.
- Insulated wrap separating or tearing inside older masonry flues. When the wrap pulls away or shreds, the liner loses insulation. In Crestline’s cold winters, that means condensation inside the flue, rust staining on the stainless, and weaker draft when you need the stove most.
- Poorly sized or uninsulated DuraFlex liners in mid-century cabins. We regularly see liners that were installed as a quick retrofit without matching the liner diameter to the appliance and flue height. The result is sluggish draft, smoke rollout, and creosote accumulation far faster than it should happen.
- Loose or missing caps on forest-edge homes. After major wildfires in the San Bernardino Mountains, we get a spike in calls from Crestline homeowners checking for ember intrusion and insurance compliance. A damaged or missing cap is the first thing an inspector flags.
DuraFlex Service in Crestline: What Local Conditions Mean for Your Equipment
Here’s something we deal with in Crestline more than anywhere down the hill: older cabins got DuraFlex liners installed into masonry chimneys that were never originally built for a liner. No modern clay tile flue, often no proper clearance. That works until it doesn’t. In this situation, a camera inspection down the flue is the only real way to see whether the liner is actually seated and insulated correctly. We’re not guessing from the roof. The camera shows us, and we show you. On a call off the forest-edge side of Crestline near Lake Arrowhead DuraFlex service territory, our tech pulled a camera down a DuraFlex SW liner in a 1950s cabin and found glazed creosote packed into the corrugations plus a loose top adapter plate shifting against a snow-loaded cap. We rotary-cleaned the liner, re-banded the adapter, and set a new multi-flue cap. Draft came back, and the homeowner passed their insurance inspection that same week. That clearance-and-liner-seating condition is routine in Crestline and rare in the valley cities below.
DuraFlex Models & Products We Service in Crestline
We service the full range of DuraFlex components found in Crestline homes: the SW single-wall flexible stainless liner kit, Pro and ProFlex insulated flexible liners for wood stoves and inserts, rigid-plus-flex hybrid relines for masonry chimneys, and pellet vent or appliance connector kits. Our parts approach is simple. OEM DuraFlex liner sections, top plates, and adapters first, where they’re still available. Quality aftermarket caps and hardware when OEM is discontinued or backordered, and we tell you which it is. If a liner is sound, we clean, re-band, and re-cap it. If the corrugations are heat-damaged or the wrap is gone, we’re honest that a fresh reline is cheaper than chasing repeated failures season after season.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Crestline
A standard chimney sweep and inspection in Crestline runs $149 to $250 depending on the system and how much creosote has built up. A Level 2 camera inspection runs $195 to $640, and for older cabins with unverified liner installations, it’s usually the right call. Cap replacement typically lands between $120 and $350. DuraFlex reline or repair work is quoted job by job, because liner length, flue access, and the condition of the existing masonry all move the number. Every estimate is free, and we show you the camera footage before recommending anything. Call (877) 516-7159 for an exact quote based on what’s actually in your flue.
Serving Crestline, CA — Our Local Coverage Area
We’re based in the Crestline area and know this community well, with Highland DuraFlex service also within our coverage. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Crestline
My Crestline cabin has a DuraFlex liner I didn’t install – can you tell if it’s still safe?
Yes. We run a Level 2 camera inspection down the liner and check seating, clearances, insulation integrity, and heat damage. You see the footage yourself. If it’s sound, we tell you. If it’s not, we show you exactly why.
Why does my DuraFlex liner keep getting glazed creosote every season?
In Crestline’s climate, heavy wood-stove use at 4,600 feet plus cold flue temperatures creates the right conditions for glaze to form in the corrugation valleys. The fix is usually a rotary cleaning with a poly whip, plus a check on how the stove is being burned and whether the liner is properly insulated. Call (877) 516-7159 to schedule a sweep and we’ll figure out what’s driving it.
Does the forest boundary affect my chimney inspection requirements?
It can. Homes near the San Bernardino National Forest boundary in Crestline often face stricter insurance requirements for chimney condition, especially after wildfire seasons, and we’ve handled similar DuraFlex repair in Muscoy situations. A Level 2 inspection with documentation is often what your insurer wants. We provide the report.
Can you replace just the cap on my DuraFlex flue, or do I need a whole new liner?
We replace caps independently all the time. If the liner itself is sound and the cap is the only problem, that’s a simple fix with a new multi-flue or specialty cap. We won’t sell you a reline you don’t need. Call (877) 516-7159 and we’ll tell you what’s actually required.
What does a DuraFlex reline involve for an older masonry fireplace here?
For Crestline’s mid-century masonry chimneys, a reline usually means removing the old liner, assessing the masonry flue, and pulling a new properly sized DuraFlex liner with correct insulation. The biggest variable is whether the original chimney has the clearance for an insulated liner. We measure, we camera-check, and we quote it before any work starts.
Service Areas Near Crestline
In addition to Crestline, we serve nearby San Bernardino, Rialto, Colton, Loma Linda, and the surrounding mountain and valley communities. If you’re outside Crestline, check our DuraFlex service in Mentone or DuraFlex service in Sunnyslope pages for specific coverage details.
Book Your DuraFlex Service in Crestline Today
If your DuraFlex liner hasn’t been inspected in the last year, now’s the time. Winter burning season in Crestline is coming. Call (877) 516-7159 for a free estimate, and we’ll get your liner cleaned, inspected, and built to last another season.
Written by Allen Prescott, Owner at San Bernardino Chimney Sweep, serving Crestline and the surrounding mountain communities. A clean flue isn’t a luxury – it’s just how you keep the fire where it belongs.